Jump to content
×
Are you looking for the BariatricPal Store? Go now!

deadlifts and finger tip blood flow



Recommended Posts

There are two things I can never do while deadlifting. 1) use hook grip, and 2) sumo deadlift. I grip tight, with chalk.

Muscle Irradiation, it's the thing Gods are made of. Instead of a loose grip, you want to grip as tight as you can. This activates your forearms, lats, chest, everything you can to provide a solid, stable foundation and engages several muscle groups to start the pull. If you're loose, you're using more of your lower back, thus you're gonna end up screwing something up in the end, plus it elongates your biceps tendon, seen a lot of guys pull things by not staying tight. I'll try to explain my setup.

1) Step up to the bar, bar sits across the bottom of my toes if looking down, feel shoulder width apart, I pull conventional even though most big guys pull sumo.

2) Reach down, get a loose grip and slowly tighten everything up, legs straight.

3) Huge breath in, tighten grip and upper body, bend knees, look up and pull. I don't jerk anything, it's all smooth, once the lift is at the top, lock it out by throwing my hips forward, upper body with a slight backwards lean on heavier sets.

I think Dave Tate has some awesome deadlift set up videos, Jim Wendler will have a few as well on youtube for sure.

I'm a big guy too and I never could sumo DL until very recently. I'm really starting to like it although not as strong doing it yet. I always have trouble retracting my shoulder blades properly on regular DL but the sumo is a bit easier to keep them back for me.

Share this post


Link to post
Share on other sites

There are two things I can never do while deadlifting. 1) use hook grip' date=' and 2) sumo deadlift. I grip tight, with chalk.

Muscle Irradiation, it's the thing Gods are made of. Instead of a loose grip, you want to grip as tight as you can. This activates your forearms, lats, chest, everything you can to provide a solid, stable foundation and engages several muscle groups to start the pull. If you're loose, you're using more of your lower back, thus you're gonna end up screwing something up in the end, plus it elongates your biceps tendon, seen a lot of guys pull things by not staying tight. I'll try to explain my setup.

1) Step up to the bar, bar sits across the bottom of my toes if looking down, feel shoulder width apart, I pull conventional even though most big guys pull sumo.

2) Reach down, get a loose grip and slowly tighten everything up, legs straight.

3) Huge breath in, tighten grip and upper body, bend knees, look up and pull. I don't jerk anything, it's all smooth, once the lift is at the top, lock it out by throwing my hips forward, upper body with a slight backwards lean on heavier sets.

I think Dave Tate has some awesome deadlift set up videos, Jim Wendler will have a few as well on youtube for sure.[/quote']

Thanks Mark! This is really helpful and I will post back how this goes after applying the technique at my next one rep testing session on Tuesday.

Share this post


Link to post
Share on other sites

Mark, BTB, Around, Tally and many others- I cannot begin to express my appreciation for you guys taking the time to consistently provide high quality information in the fitness forum with regards to lifting and supplementation. For guys that are newer to the fitness and bodybuilding scene, this information is invaluable. Being 6 months into this type of fitness, I consider myself a newbie. :) however, I am glad that every day is a new day to increase understanding about the body and the role that fitness and supplementation has on it.

Share this post


Link to post
Share on other sites

Mark, BTB, Around, Tally and many others- I cannot begin to express my appreciation for you guys taking the time to consistently provide high quality information in the fitness forum with regards to lifting and supplementation. For guys that are newer to the fitness and bodybuilding scene, this information is invaluable. Being 6 months into this type of fitness, I consider myself a newbie. :) however, I am glad that every day is a new day to increase understanding about the body and the role that fitness and supplementation has on it.

Fid, no problem man. I know we're all like minded and enjoy sharing the knowledge we've gained throughout the years. That's one thing I do love about powerlifting. It's all about "me" on the platform, but in the gym when training, most of the guys will share their deepest insight to powerlifting and pretty much anything else you want with you, even sometimes things you'd never ever ever want to know about another man, ever, seriously.

If you want some entraining listening, with a lot of good information, check out the Just Big radio show on FTNS. Vincent Dizenzo is the host, he's an elite bench presser, and a beast. He's always got some awesome guests on there, Jim Wendler, Dave Tate to name a few.

Share this post


Link to post
Share on other sites

Hook grip worked great today (trainer even showed it before I asked about it). I got a PR on my dead lift at 350 for 1 rep test today. Funny thing, it does not feel that heavy in my gluts or upper legs. My back strength is where I am holding back. Need to keep my weight way back along with the slight invert in back. Once I reached failure, no matter how much I visualized correct form, the execution of it sucked because my lower back did not want to support it. Oh and no white fingers. :) However, I got the usual delayed blood rush after lifting heavy 5-10 seconds following lift). It is quite interesting where it is almost like fainting, but in a good way. :)

Share this post


Link to post
Share on other sites

Hook grip worked great today (trainer even showed it before I asked about it). I got a PR on my dead lift at 350 for 1 rep test today. Funny thing, it does not feel that heavy in my gluts or upper legs. My back strength is where I am holding back. Need to keep my weight way back along with the slight invert in back. Once I reached failure, no matter how much I visualized correct form, the execution of it sucked because my lower back did not want to support it. Oh and no white fingers. :) However, I got the usual delayed blood rush after lifting heavy 5-10 seconds following lift). It is quite interesting where it is almost like fainting, but in a good way. :)

Yay!

Share this post


Link to post
Share on other sites

Awesome work Fid. Proud of you. Are you lifting with a belt? My lower back has always felt weak, anything after 405 and I have to go with a belt just for support and to keep everything tight in my stomach and back. Back extensions with either a 45lb plate, or if you wanna get crazy a barbell loaded with either 25lb plates, 35's, or 45's to do back extensions with will also help build up your lower back. Stiff leg deadlifts also helped me a ton develop back there. My lower back is still weak in my opinion, but that's my own fault for never pinpointing it. Put in some work to develop that lower back, and it'll make a world of difference man.

Share this post


Link to post
Share on other sites

great advice and it all makes sense. I do not use a belt, but may need to now that my weight is increasing. I am going to put into practice the suggested strength exercises. My trainer is very precise about pointing out my weak point which is exactly what I need: constant tweaking. :) I like stiff legged dead lifts and the weight tends to be about 60% of regular dead lifts in order to not injure the hamstring.

Share this post


Link to post
Share on other sites

You'll be tweaking things for the rest of your lifting career man. I log every single work out, going back in my log and looking at changes I've made, I tweak things probably about once a month. I'll either drop a movement or add one to my overall sets depending on how I'm feeling, what's working, what isn't working, etc. To me, my biceps and lower back suck, so every day I do something for biceps and lower back, high reps low weight, every day I'm in the gym, even if just enough to get blood pumping through and some minor Fiber tears to get repaired, work is work. I love the science of building up a body part and hitting it hard, then watching it grow. If you're anything like me, the more you develop something the harder you're going to work it. The future is awesome when it comes to just how far we can push our bodies.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Trending Products

  • Trending Topics

  • Recent Status Updates

    • Stone Art By SKL

      Decorative Wall Cladding & Panels | Stone Art By SKL
      Elevate your space with Stone Art By SKL's decorative wall claddings & panels. Explore premium designs for timeless elegance.
      · 0 replies
      1. This update has no replies.
    • Clueless_girl

      Losing my hair in clumps and still dealing with "stomach" issues from gallbladder removal surgery. On the positive side I'm doing better about meeting protein and water goals and taking my vitamins, so yay? 🤷‍♀️
      · 0 replies
      1. This update has no replies.
    • BeanitoDiego

      I've hit a stall 9 months out. I'm not worried, though. My fitness levels continue to improve and I have nearly accomplished my pre-surgery goal of learning to scuba dive! One dive left to complete to get my PADI card 🐠
      I was able to go for a 10K/6mile hike in the mountains two days ago just for the fun of it. In the before days, I might have attempted this, but it would have taken me 7 or 8 hours to complete and I would have been exhausted and in pain for the next two days. Taking my time with breaks for snacks and water, I was finished with my wee jaunt in only 4 hours 😎 and really got to enjoy photographing some insects, fungi, and turtles.
      · 0 replies
      1. This update has no replies.
    • Mr.Kantos

      Just signed up. Feeling optimistic.
      · 0 replies
      1. This update has no replies.
    • Frugal

      Welcome to Frugal Testing, where we are committed to revolutionizing the software testing landscape with our efficient and affordable solutions. As a pioneering company in this field, we understand the challenges faced by startups, small to medium-sized businesses and any organization working without budget constraints. Our mission is to deliver top-notch testing services that ensure the highest quality of software, all while keeping your costs in check.
      Frugal Testing offers a comprehensive suite of testing services tailored to meet diverse needs. Specializing in different types of testing including functional testing, automation testing, metaverse testing and D365 testing, we cover all bases to guarantee thorough software quality assurance. Our approach is not just about identifying bugs; it's about ensuring a seamless and superior user experience.
      Innovation is at the heart of what we do. By integrating the latest tools and technologies, many of which are cutting-edge open source solutions, we stay ahead in delivering efficient and effective testing services. This approach allows us to provide exceptional quality testing without the high costs typically associated with advanced testing methodologies.
      Understanding each client's unique needs is fundamental to our service delivery. At Frugal Testing, the focus is on creating customized testing strategies that align with specific business goals and budget requirements. This client-centric approach ensures that every testing solution is not only effective but also fully aligned with the client's objectives.
      Our team is our greatest asset. Composed of skilled professionals who are experts in the latest testing techniques and technologies, they bring dedication, expertise and a commitment to excellence in every project. This expertise ensures that our client’s software not only meets but often exceeds the highest standards of quality and performance.
      Frugal Testing is more than just a service provider; we are a partner in your success. With a blend of quality, innovation and cost-effectiveness, we are here to help you navigate the complexities of software testing, ensuring your product stands out in today's competitive market. 
      · 0 replies
      1. This update has no replies.
  • Recent Topics

  • Hot Products

  • Sign Up For
    Our Newsletter

    Follow us for the latest news
    and special product offers!
  • Together, we have lost...
      lbs

    PatchAid Vitamin Patches

    ×